Product Description
Vacmul A6 was developed for machining higher tensile ferrous and non-ferrous
alloys under heavy duty conditions in turning, tapping, screw cutting and gear
cutting operations, particularly where heavy feed rates at slower cutting
speeds are applied, and it is recommended for the flute grinding of twist
drills.
Vacmul A6 is also suitable as a dual and triple purpose oil. In addition to
serving as a cutting fluid, it may be used for the hydraulic system and/or the
lubrication system of the machine tool where leakage and contamination of the
cutting fluid and lubricant can occur.
Vacmul 2105 is primarily recommended as a drill flute grinding oil and for all
arduous form grinding operations. In these operations high temperatures are
generated at the work-piece/wheel cutting surfaces. Vacmul 2105 prevents
overheating, distortion and dimensional inaccuracies when grinding at fast
rates. Superior surface finish is obtained.
Vacmul 2105 can be used as a general purpose cutting oil on automatics, gear
cutting and all operations where a non-corrosive oil is required for machining
ferrous and non-ferrous metals.
Typical Properties
Vacmul
|
A6
|
2105
|
| Specific Gravity, ASTM D1298 | 0.876 | 0.872 |
| Color, ASTM D 1500 | 6.0 | 2.0 |
| Flash Point, ASTM D 92, °C, min | 202 | 204 |
| Viscosity, ASTM D 445 | | |
| cSt at 40°C | 25 | 29 |
| Copper Strip Corrosion, ASTM D 130, 3 hrs. at 100°C (212°F) | 1A | 1A |
Back to Top
Health and Safety
Based on available toxicological information, these products have little or no
adverse effects on health when properly handled and used. No special
precautions are suggested beyond attention to good personal hygiene, including
avoiding prolonged, repeated skin contact. Material Safety Data Sheets can be
obtained from your local distributor; via the Internet on
http://www.msds.exxonmobil.com.
For additional technical information or to identify the nearest U.S. Mobil
supply source, call 1-800-662-4525.
|
